No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - Security

AR100, AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R010

This document provides the basic concepts, configuration procedures, and configuration examples in different application scenarios of the network management feature supported by the device.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Setting the Priority for Packets of a Specified Protocol

Setting the Priority for Packets of a Specified Protocol

Context

After an attack defense policy is created, set priorities of protocol packets in the attack defense policy so that packets with higher priorities are processed first.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run cpu-defend policy policy-name

    The attack defense policy view is displayed.

  3. Run packet-type packet-type priority priority-level

    The priority for packets of a specified protocol sent to the CPU is set.

    By default, the priority defined in the default attack defense policy is used for packets of a specified protocol sent to the CPU.

Translation
Download
Updated: 2019-05-20

Document ID: EDOC1100034077

Views: 111632

Downloads: 204

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next