No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


CLI-based Configuration Guide - Security

AR100, AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R010

This document provides the basic concepts, configuration procedures, and configuration examples in different application scenarios of the network management feature supported by the device.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
How Can I View the ACL Hit Count Configured on the Packet Filtering Firewall?

How Can I View the ACL Hit Count Configured on the Packet Filtering Firewall?

  1. In the system view, run the traffic classifier classifier-name command to create a traffic classifier and access the traffic classifier view. Run the if-match acl { acl-number | acl-name } command to configure ACL rules for traffic classification.
  2. In the system view, run the traffic behavior behavior-name command to create a traffic behavior and access the traffic behavior view. Run the statistic enable command to enable the traffic statistics function.
  3. In the system view, run the traffic policy policy-name command to create a traffic policy and access the traffic policy view. Run the classifier classifier-name behavior behavior-name command to associate a traffic classifier and a traffic behavior with the traffic policy.
  4. In the interface view, run the traffic-policy policy-name inbound command.
  5. Run the display traffic policy statistics interface interface-type interface-number inbound verbose rule-base command to view the ACL hit count configured on the packet filtering firewall.
Updated: 2019-08-07

Document ID: EDOC1100034077

Views: 126972

Downloads: 231

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next