No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - Security

AR100, AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R010

This document provides the basic concepts, configuration procedures, and configuration examples in different application scenarios of the network management feature supported by the device.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Verifying the DHCP Snooping Attack Defense Configuration

Verifying the DHCP Snooping Attack Defense Configuration

Context

After DHCP snooping attack defense is completely configured, check the configured parameters.

Procedure

  • Run the display dhcp snooping [ interface interface-type interface-number | vlan vlan-id ] command to view DHCP snooping running information.
  • Run the display dhcp snooping configuration [ vlan vlan-id | interface interface-type interface-number ] command to view the DHCP snooping configuration.
  • Run the display dhcp snooping statistics command to check statistics on the received DHCP messages.
Translation
Download
Updated: 2019-08-07

Document ID: EDOC1100034077

Views: 135777

Downloads: 244

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next