No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - Security

AR100, AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R010

This document provides the basic concepts, configuration procedures, and configuration examples in different application scenarios of the network management feature supported by the device.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Maintaining IPS

Maintaining IPS

Viewing IPS Statistics

Context

After specified security policies are applied on interfaces, you can view IPS statistics to check detected alarm events and blocking events.

You can view statistics on the number of times that an IPS signature is matched. You can also choose to view statistics on the top 100 IPS signatures among all the IPS signatures that are matched for the most times.

Procedure

  • Run in any view:

    display ips statistics

    IPS statistics are displayed.

  • Run in any view:

    display ips-signature statistics topn-number

    Top topn-number IPS signatures among all the IPS signatures that are matched for the most times are displayed.

  • Run display cnc domain-filter { domain | exception | domain-name domain-name } statistics

    The domain name filtering statistics are displayed.

  • Run display cnc domain-filter domain statistics topn-number

    The top topn-number matched malicious domain names are displayed.

Clearing IPS Statistics

Context

Before recollecting IPS statistics, run the following command in the user view to clear the existing statistics.

IPS statistics cannot be restored after they are cleared. Exercise caution when you clear the statistics.

Procedure

  1. Run reset ips statistics

    IPS statistics are cleared.

  2. Run reset ips-signature statistics { signature-id signature-id | all } { event | collect-attack-evidence | all }

    Statistics on the number of times that an IPS signature is matched are cleared.

  3. Run reset cnc domain-filter { domain | exception | domain-name domain-name } statistics

    The domain name-based filtering statistics are cleared.

Translation
Download
Updated: 2019-05-20

Document ID: EDOC1100034077

Views: 112794

Downloads: 206

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next