No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


CLI-based Configuration Guide - Security

AR100, AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R010

This document provides the basic concepts, configuration procedures, and configuration examples in different application scenarios of the network management feature supported by the device.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring the AAA Alarm Report Function

Configuring the AAA Alarm Report Function


You can configure the alarm report function, which helps you obtain real-time running status of AAA (for example, the status of the communication with the RADIUS server becomes Down) and facilitates O&M.


  1. Run system-view

    The system view is displayed.

  2. Run snmp-agent trap enable feature-name radius [ trap-name { hwradiusacctserverdown | hwradiusacctserverup | hwradiusauthserverdown | hwradiusauthserverup } ]

    The alarm report function is enabled for the RDS module.

    By default, the alarm report function is disabled for the RDS module.

Verifying the Configuration

Run the display snmp-agent trap feature-name radius all command to view alarm status of the RDS module.

Updated: 2019-08-07

Document ID: EDOC1100034077

Views: 136085

Downloads: 244

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next