No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


CLI-based Configuration Guide - Security

AR100, AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R010

This document provides the basic concepts, configuration procedures, and configuration examples in different application scenarios of the network management feature supported by the device.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
(Optional) Enabling Location Transition for DHCP Snooping Users

(Optional) Enabling Location Transition for DHCP Snooping Users


In mobile applications, if a user goes online from interfaceA and then switches to interfaceB, you need to enable location transition for DHCP snooping users.


  1. Run system-view

    The system view is displayed.

  2. Run dhcp snooping user-transfer enable

    Location transition is enabled for DHCP snooping users.

    By default, location transition is enabled for DHCP snooping users.

Updated: 2019-08-07

Document ID: EDOC1100034077

Views: 127848

Downloads: 231

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next