No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


CLI-based Configuration Guide - Security

AR100, AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R010

This document provides the basic concepts, configuration procedures, and configuration examples in different application scenarios of the network management feature supported by the device.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring CPU Attack Defense

Configuring CPU Attack Defense

With the CPU attack defense function, the device limits the rate of packets sent to the CPU to protect the CPU.

Pre-configuration Tasks

Before configuring CPU attack defense, complete the following tasks:

  • Connect interfaces and set physical parameters for the interfaces to ensure that the physical status of the interfaces is Up.
  • Configure an ACL for blacklist, if necessary.

Configuration Procedure

Before configuring CPU attack defense, create an attack defense policy. The other tasks can be performed in any sequence and can be selected as required. An attack defense policy takes effect only after it is applied to an object. There is no limitation on when the attack defense policy is applied.

Updated: 2019-08-07

Document ID: EDOC1100034077

Views: 134547

Downloads: 242

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next