No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


KunLun 9008 V5 CMC User Guide 04

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
About This Document

About This Document


This document describes the central management console (CMC) web user interface (WebUI) and command-line interface (CLI) of the KunLun 9008 V5 (with a CME). It covers the following content:

  • WebUI: describes the function, parameters, and operation method of each CMC web page.
  • CLI: describes the syntax, parameters, usage guidelines, and usage method of each CMC command.
  • This document describes only commands used for network deployment and maintenance of Huawei devices, and does not include commands used for production, device assembly, and return-to-repair.
  • Incorrect use of commands used only for engineering or troubleshooting may cause device exceptions or service interruption. Contact Huawei technical support to obtain these commands.

Intended Audience

This document is intended for:

  • Installation and commissioning engineers
  • Field maintenance engineers
  • System maintenance engineers
  • Network monitoring engineers
  • Network administrators

Symbol Conventions

The symbols that may be found in this document are defined as follows:



Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.

Indicates a potentially hazardous situation which, if not avoided, could result in equipment damage, data loss, performance deterioration, or unanticipated results.

NOTICE is used to address practices not related to personal injury.

Calls attention to important information, best practices and tips.

NOTE is used to address information not related to personal injury, equipment damage, and environment deterioration.

Change History

Changes between document issues are cumulative. The latest document issue contains all the changes made in earlier issues.

Issue 04 (2019-05-20)

The issue is the fourth official release, VIO is updated.

Issue 03 (2019-01-07)

The issue is the third official release, KPAR is updated.

Issue 02 (2018-11-15)

The issue is the second official release, Partition Management is updated.

Issue 01 (2018-08-06)

The issue is the first official release.

Updated: 2019-05-25

Document ID: EDOC1100034204

Views: 38443

Downloads: 33

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next