No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - AMI

AR500, AR510, AR531, AR550, AR1500, and AR2500 V200R010

This document describes the principles and configurations of the AMI features, and provides configuration examples of these features.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Monitoring and Resetting the Communication Module

Monitoring and Resetting the Communication Module

Context

During routine maintenance, you can run the following commands to check the communication module status.

When the communication module fails, reset the communication module.

Procedure

  • Run the display ami module-status module-name command in any view to check the communication module status.
  • Run the display ami module-statistic { module-name | all } command in any view to check statistics about the communication module.
  • Run the reset channel-type channel-type command in the AMI view to reset the communication module.
Translation
Download
Updated: 2019-03-07

Document ID: EDOC1100034224

Views: 10012

Downloads: 20

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next