No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - AMI

AR500, AR510, AR531, AR550, AR1500, and AR2500 V200R010

This document describes the principles and configurations of the AMI features, and provides configuration examples of these features.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Application Scenarios for AMI

Application Scenarios for AMI

The device functions as the DCU gateway and integrates the DCU and router functions, facilitating installation and commissioning and saves investment. The DCU gateway can be widely used in data collection, storage, and communication of various smart meters (such as electricity meters, energy meters, and gas meters) in IoT solutions.

Figure 1-4 shows an electricity network. The device can connect to meters through RS485, PLC, ZigBee, and RF channels. The device collects meter data for automatic meter data reading and forwards the meter data collected through FE/SFP or 3G to the front-end processor to implement smart grid.

Figure 1-4  AMI networking

Translation
Download
Updated: 2019-03-07

Document ID: EDOC1100034224

Views: 10017

Downloads: 20

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next