No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - AMI

AR500, AR510, AR531, AR550, AR1500, and AR2500 V200R010

This document describes the principles and configurations of the AMI features, and provides configuration examples of these features.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Saving and Restoring the AMI Configuration

Saving and Restoring the AMI Configuration

Context

Before device delivery, the AMI user-defined and factory configurations are the same. After the AMI configuration is modified, save it as the user-defined configuration. The current configuration can be restored to the user-defined or factory configuration.

Procedure

  • Run the tool save-as-project command in the AMI view to save the AMI user-defined configuration.
  • Run the reset configuration project command in the AMI view to restore the AMI user-defined configuration.
  • Run the reset configuration factory command in the AMI view to restore the AMI factory configuration.
Translation
Download
Updated: 2019-03-07

Document ID: EDOC1100034224

Views: 10039

Downloads: 20

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next