No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - AMI

AR500, AR510, AR531, AR550, AR1500, and AR2500 V200R010

This document describes the principles and configurations of the AMI features, and provides configuration examples of these features.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Verifying the Configuration of Communication Between the Device and DCPs

Verifying the Configuration of Communication Between the Device and DCPs

Context

After the communication between the device and DCP is configured, run the following commands in any view to check the configuration, including the device connection type and status of the channel between the device and DCP.

Procedure

  • Run the display ami configuration basic command to check basic configurations of the device.
  • Run the display ami configuration connection [ connection-name ] command to check the configuration of the connection between the device and DCP.
  • Run the display ami status command to check the status (idle, connecting, connected, or login) of the channel between the device and DCP.
Translation
Download
Updated: 2019-03-07

Document ID: EDOC1100034224

Views: 10066

Downloads: 20

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next