No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - Basic Configuration

AR500, AR510, AR531, AR550, AR1500, and AR2500 V200R010

This document provides the basic concepts, configuration procedures, and configuration examples in different application scenarios of the Basic configuration supported by the device.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
(Optional) Setting the Storage Directory of the Logo Image on the Web Page

(Optional) Setting the Storage Directory of the Logo Image on the Web Page

Context

The device supports customization of the logo image on the web page. You can change the logo image based on actual requirements so that the logo image on the web page is more beautiful.

The logo image must be stored using the required file name and size in the subdirectory for storing the logo image. After the storage directory of the logo image on the web page is set, the device automatically reads the file under the directory and changes the logo image on the web page.

Store three files with different pixel sizes of the required logo image in the created subdirectory, and name them as required. Name the image with the pixel size 16x16 logo1.png, the image with the pixel size 21x22 logo2.png, and the image with the pixel size 44x44 logo3.png.

Procedure

  1. Run mkdir directory

    A subdirectory is created for storing the logo image under the directory logo-path of the default working directory on the device.

  2. Run system-view

    The system view is displayed.

  3. Run set logo-path subpathname

    The storage directory of the logo image on the web page is set.

    By default, the storage directory of the Huawei logo image is used.

Translation
Download
Updated: 2019-05-20

Document ID: EDOC1100034225

Views: 44541

Downloads: 100

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next