No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - Basic Configuration

AR500, AR510, AR531, AR550, AR1500, and AR2500 V200R010

This document provides the basic concepts, configuration procedures, and configuration examples in different application scenarios of the Basic configuration supported by the device.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Verifying the Configuration

Verifying the Configuration

Procedure

  • Run the display autoconfig-status command to check the Auto-Config running status.
  • Run the display ip pool { interface interface-pool-name | name ip-pool-name } used command to check the IP addresses that the DHCP server assigns to devices to be configured.
  • Run the display dhcp relay { all | interface interface-type interface-number } command to check the DHCP server or DHCP server group on the interface.
  • Run the display dhcp server group [ group-name ] command to check configuration of the DHCP server group on the DHCP relay agent.
  • Run the display startup command to check the startup configuration file, system software, and patch file.
Translation
Download
Updated: 2019-08-09

Document ID: EDOC1100034225

Views: 46450

Downloads: 101

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next