No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - Basic Configuration

AR500, AR510, AR531, AR550, AR1500, and AR2500 V200R010

This document provides the basic concepts, configuration procedures, and configuration examples in different application scenarios of the Basic configuration supported by the device.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Intermediate File

Intermediate File

If Option 67 that contains information about the configuration file is not configured on the DHCP server, Auto-Config enables devices to obtain information about version files that need to be downloaded by parsing the intermediate file.

The intermediate file is saved on the file server and contains information about mappings from system MAC address or ESN to the system software name, system software version, patch file name, and configuration file name. After obtaining the IP address of the file server, the device downloads the intermediate file from the file server, searches for the system software name, system software version, patch file name and configuration file name that match its own MAC address or ESN, and downloads files from the file server based on the obtained file names.

For example, if the MAC address of a device is 0018-82C5-AA89, the ESN is 9300070123456789, the version file name is auto_V200R010.cc, the version is V200R010, the patch file is auto_V200R010.pat, the configuration file is auto_V200R010.cfg, the intermediate file content is as follows:
MAC=0018-82C5-AA89;vrpfile=auto_V200R010.cc;vrpver=V200R010;patchfile=auto_V200R010.pat;cfgfile=auto_V200R010.cfg;
NOTE:
  • The intermediate file name is arnet.ini.
  • If multiple devices are configured, each row in the intermediate file records configuration information about each device.
  • When configuring the intermediate file, enter the MAC address and ESN, or either of them. The configuration file is mandatory, and the version file and patch file are optional. The three files can be configured in any sequence.
  • The version file name and system software version must be available in the intermediate file, and version ID in the system software name must be the same as that in the intermediate file. The version number (vrpver) must be included in the system software information (vrpfile).
Translation
Download
Updated: 2019-05-20

Document ID: EDOC1100034225

Views: 45012

Downloads: 100

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next