No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - Basic Configuration

AR500, AR510, AR531, AR550, AR1500, and AR2500 V200R010

This document provides the basic concepts, configuration procedures, and configuration examples in different application scenarios of the Basic configuration supported by the device.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Example for Backing Up the Configuration File

Example for Backing Up the Configuration File

Networking Requirements

As shown in Figure 11-2, a user logs in to the device and backs up the configuration file to the TFTP server. So the configuration file can be recovered in case that the device is damaged.

Figure 11-2  Networking diagram of backing up the configuration file

Configuration Roadmap

The configuration roadmap is as follows:

  1. Save the configuration file.

  2. Back up the configuration file through TFTP.

    Configuration file backup through TFTP is simple, but there are security risks. In scenarios with high security requirements, configuration file backup through SFTP is recommended. The following describes the configuration file backup process using TFTP as an example.

Procedure

  1. Save configurations to the config.cfg file.

    <Huawei> save config.cfg

  2. Back up the configuration file through TFTP.
    1. Start the TFTP server program.

      Start the TFTP server program on the PC. Set the path for transmitting the configuration file, and the IP address and port number of the TFTP server.

    2. Transfer the configuration file.

      # Run the tftp command in the user view to back up the specified configuration file.

      <Huawei> tftp 10.110.24.254 put flash:/config.cfg backup.cfg

Translation
Download
Updated: 2019-08-09

Document ID: EDOC1100034225

Views: 46527

Downloads: 105

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next