No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - Basic Configuration

AR500, AR510, AR531, AR550, AR1500, and AR2500 V200R010

This document provides the basic concepts, configuration procedures, and configuration examples in different application scenarios of the Basic configuration supported by the device.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Logging In to the Web System

Logging In to the Web System

Context

As shown in Figure 10-1, a PC connects to a router through an IP network. After configuring the router's IP address, web system parameters, and a web system account, you can configure and manage the router on the PC through the web system.

Figure 10-1  Web system networking

Procedure

  1. Open the browser on the PC. Windows IE8.0 is used in this example. Enter https://ip address in the address box and press Enter. The web system login page is displayed, as shown in Figure 10-2.

    Figure 10-2  Web system login page

  2. Enter login information.

    1. Select a language.

      Currently, the web system supports English and Chinese, and automatically uses a language based on the browser.

    2. Enter the user name and password.
      • The default user name for logging in to the web system is admin, and the default password is Admin@huawei.
      • The default user name for logging in to the voice self-service system is User Name of the configured voice user, and the default password is Admin@huawei.
    3. Click Login.

      The system displays a message about login failure in situations shown in Figure 10-3.

      Figure 10-3  Login failure

      Check the cause of the login failure based on the prompt message. If the number of incorrect password attempts reaches the upper limit, the current account will be locked. By default, a locked account is automatically unlocked after 5 minutes.

    NOTE:

    After a user logs in, the web system automatically displays the last login time, IP address, and login mode of the user.

  3. Change the login password.

    The system asks you to change the password in the following situations, as shown in Figure 10-4.

    • If the login password expires, the system forcibly requires you to change the password.
    • If you log in to the system for the first time after the password is changed by another user, the system forcibly requires you to change the password.
    • If you log in to the system within the password expiration notification period, the system notifies you of the password expiration time and advises you to change the password.
    Figure 10-4  Password change page
    NOTE:
    • If the parameters are marked with a red asterisk (*), the system forcibly requires you to change the password. After changing the password, click OK. If the password is changed successfully, the system displays the message "Your password has been modified successfully". Click OK. The login page is displayed. If you do not change the password, click Cancel. The login page is displayed and you cannot log in to the web system.
    • If the parameters are not marked with a red asterisk (*), the system asks you to change the password. After changing the password, click OK. If the password is changed successfully, the system displays the message "Your password has been modified successfully". Click OK. The login page is displayed. If you do not change the password, click Cancel. The Device Information page is displayed.

  4. Click Logout in the upper right corner of the page to return to the login page.
  5. If you do not perform any operations within a period (10 minutes by default) after logging in to the web system, the system automatically logs you out. Click OK to return to the login page.
Translation
Download
Updated: 2019-05-20

Document ID: EDOC1100034225

Views: 44468

Downloads: 100

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next