No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


CLI-based Configuration Guide - Basic Configuration

AR500, AR510, AR531, AR550, AR1500, and AR2500 V200R010

This document provides the basic concepts, configuration procedures, and configuration examples in different application scenarios of the Basic configuration supported by the device.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Overview of Web System Login

Overview of Web System Login


This section describes the definition, purpose, and concepts of the web system.

The web system is a built-in web server on the device and provides a graphical user interface (GUI) for users. Before using the web system to manage and maintain a device, you need to log in to the device from a terminal using Hypertext Transfer Protocol Secure (HTTPS).


You can manage a device on the command line interface (CLI) or web system.

  • The CLI mode requires you to use commands to manage and maintain the device. This mode realizes fine-grained device management, but requires you to be familiar with the commands.
  • The web system mode allows you to easily manage and maintain the device on a GUI. However, you can only use this mode to manage and maintain some functions on the device.
You can select a proper management mode based on actual requirements.

To use the CLI, you must log in to the device through the console port or MiniUSB port, or using Telnet or STelnet. To use the web system, you must log in to the device using HTTPS.

For details about how to log in to a device through the console port or MiniUSB port, or using Telnet or STelnet, see CLI Login Configuration.
Updated: 2019-05-20

Document ID: EDOC1100034225

Views: 44542

Downloads: 100

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next