No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


CLI-based Configuration Guide - Basic Configuration

AR500, AR510, AR531, AR550, AR1500, and AR2500 V200R010

This document provides the basic concepts, configuration procedures, and configuration examples in different application scenarios of the Basic configuration supported by the device.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Creating a Web System Account

Creating a Web System Account


You can log in to the web system only after entering the correct user name and password. The network administrator can configure the user name, password, level, and service type to create a web system user. After the configuration is complete, you can log in to the web system using the configured web system account.


  1. Run system-view

    The system view is displayed.

  2. Run aaa

    The AAA view is displayed.

  3. Run local-user user-name password irreversible-cipher password

    A web system user name and password are configured.

    By default, the system has a local user whose user name is admin and password is Admin@huawei. You can directly use the user name and password to log in to the web system. After login, the system forcibly prompts you to change the password to ensure security. To ensure device security, do not set other passwords to Admin@huawei.

  4. Run local-user user-name service-type http

    The service type is set to HTTP.

    By default, the service type of the local user admin is HTTP.

  5. Run local-user user-name privilege level level

    The user level is configured.

    By default, the level of the local user admin is 15, that is, the local user is a super administrator.

    If the level of a user is 0 or no level is configured for the user, the user does not have the right to log in to the web system. The mapping between user levels and users is as follows:
    • If the user level is 1, the user is a common administrator.
    • If the user level is 2, the user is an enterprise administrator.
    • If the user level is 3 to 15, the user is a super administrator.

  6. Run quit

    Return to the system view.

Updated: 2019-05-20

Document ID: EDOC1100034225

Views: 44911

Downloads: 100

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next