No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - Basic Configuration

AR500, AR510, AR531, AR550, AR1500, and AR2500 V200R010

This document provides the basic concepts, configuration procedures, and configuration examples in different application scenarios of the Basic configuration supported by the device.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Serial Menu

Serial Menu

Access the BootROM main menu and select 2 to access the serial interface submenu.

        Main Menu

    1. Default Startup
    2. Serial Menu
    3. Network Menu
    4. Startup Select
    5. File Manager
    6. Reboot
    7. Password Manager

Enter your choice(1-7):2
        Serial Menu

    1. Update Bootrom
    2. Update CPLD Chip 0
    3. Modify baud rate
    0. Return

Enter your choice(0-3):

The &AR515GW-LM9-D&AR509G-Lc&AR509G-L-D-H&AR503GW-LM6 routers do not support the submenus Update Bootrom and Update CPLD Chip 0.

Table 13-2  Serial interface submenu

Item

Description

1. Update Bootrom

Update the BootROM through the serial interface.

2. Update CPLD Chip 0

Update the CPLD through the serial interface.

3. Modify baud rate

Modify parameters of the serial interface. The default transmission rate is 9600 bit/s.

The serial interface supports the following transmission rates:
  • 9600 bit/s
  • 19200 bit/s
  • 38400 bit/s
  • 57600 bit/s
  • 115200 bit/s

After the transmission rate on the serial interface is modified, synchronize the transmission rate on the PC to that on the serial interface and reconnect the PC to the device.

0. Return

Return to the BootROM main menu.

Translation
Download
Updated: 2019-05-20

Document ID: EDOC1100034225

Views: 44768

Downloads: 100

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next