No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - Basic Configuration

AR500, AR510, AR531, AR550, AR1500, and AR2500 V200R010

This document provides the basic concepts, configuration procedures, and configuration examples in different application scenarios of the Basic configuration supported by the device.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Startupfile Check Manage

Startupfile Check Manage

Access the startup select submenu and select 4 to access the startup file check manage menu.

To view or modify startup file check configurations, manages startup file check using this menu.

        Startup Select

    1. Display Startup
    2. Set Boot File
    3. Set Config File
    4. Startupfile Check Manage
    5. Set Startup Waiting Time
    0. return

Enter your choice(0-5):4
        File Check Manage

    1. Set FileCheck Flag
    2. Clear FileCheck Flag
    3. Query FileCheck Flag
    4. Set SignatureCheck Flag
    5. Clear SignatureCheck Flag
    6. Query SignatureCheck Flag
    0. return

Enter your choice(0-6):1
STUP_SetFileCheckFlag Success!

        File Check Manage

    1. Set FileCheck Flag
    2. Clear FileCheck Flag
    3. Query FileCheck Flag
    4. Set SignatureCheck Flag
    5. Clear SignatureCheck Flag
    6. Query SignatureCheck Flag
    0. return

Enter your choice(0-6):3
StartUp FileCheck Flag Exist

        File Check Manage

    1. Set FileCheck Flag
    2. Clear FileCheck Flag
    3. Query FileCheck Flag
    4. Set SignatureCheck Flag
    5. Clear SignatureCheck Flag
    6. Query SignatureCheck Flag
    0. return

Enter your choice(0-6):2
STUP_ClearFileCheckFlag Success!

        File Check Manage

    1. Set FileCheck Flag
    2. Clear FileCheck Flag
    3. Query FileCheck Flag
    4. Set SignatureCheck Flag
    5. Clear SignatureCheck Flag
    6. Query SignatureCheck Flag
    0. return

Enter your choice(0-6):3
StartUp FileCheck Flag not Exist

        File Check Manage

    1. Set FileCheck Flag
    2. Clear FileCheck Flag
    3. Query FileCheck Flag
    4. Set SignatureCheck Flag
    5. Clear SignatureCheck Flag
    6. Query SignatureCheck Flag
    0. return

Enter your choice(0-6):4
Set SignatureCheckFlag Success!

        File Check Manage

    1. Set FileCheck Flag
    2. Clear FileCheck Flag
    3. Query FileCheck Flag
    4. Set SignatureCheck Flag
    5. Clear SignatureCheck Flag
    6. Query SignatureCheck Flag
    0. return

Enter your choice(0-6):6
StartUp SignatureCheck Flag Exist

        File Check Manage

    1. Set FileCheck Flag
    2. Clear FileCheck Flag
    3. Query FileCheck Flag
    4. Set SignatureCheck Flag
    5. Clear SignatureCheck Flag
    6. Query SignatureCheck Flag
    0. return

Enter your choice(0-6):5
Clear SignatureCheckFlag Success!

        File Check Manage

    1. Set FileCheck Flag
    2. Clear FileCheck Flag
    3. Query FileCheck Flag
    4. Set SignatureCheck Flag
    5. Clear SignatureCheck Flag
    6. Query SignatureCheck Flag
    0. return

Enter your choice(0-6):6
StartUp SignatureCheck Flag not Exist
Table 13-5  Startupfile Check Manage

Item

Description

1. Set FileCheck Flag

Set the check flag for the system software. The check flag is used for performing the system software check.

2. Clear FileCheck Flag

Cancel the check flag for the system software.

3. Query FileCheck Flag

Check whether the check flag for the system software is set.

4. Set SignatureCheck Flag

Set the check flag for the digital signature file of the system software. The check flag is used for performing the validity check for the digital signature file of the system software.

5. Clear SignatureCheck Flag

Cancel the check flag for the digital signature file of the system software.

6. Query SignatureCheck Flag

Check whether the check flag for the digital signature file of the system software is set.

0. Return

Return to the main menu.

Only the AR515GW-LM9-D supports items 4, 5, and 6 in the memu.

Translation
Download
Updated: 2019-05-20

Document ID: EDOC1100034225

Views: 44999

Downloads: 100

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next