No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - Basic Configuration

AR500, AR510, AR531, AR550, AR1500, and AR2500 V200R010

This document provides the basic concepts, configuration procedures, and configuration examples in different application scenarios of the Basic configuration supported by the device.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Overview of the First Login

Overview of the First Login

This section describes login modes supported by the device when you log in for the first time and the corresponding basic configuration.

To configure a new device, log in to the device first. A device supports first login through the console port or the mini USB port.

The main control unit of a device provides a console port and a mini USB port. To configure a device, connect the user terminal serial port to the device console port or connect the user terminal USB port to the mini USB port of the device.

After login, configure the system time, device name, management IP address, and user level and authentication mode for Telnet users to facilitate subsequent configuration.

NOTE:
  • Before logging in to the device using the mini USB port, install the mini USB port driver on the user terminal.

    To obtain the mini USB driver, visit http://support.huawei.com/enterprise and select AR_MiniUSB_driver(AR510 series (except AR515CGW-L) use CP210x_VCP_Windows) to download. The mini USB driver supports only Windows XP, Windows Vista, and Windows 7 operating systems.

  • When both the mini USB port and console port are connected to the user terminal, only the mini USB port can be used for login.
Translation
Download
Updated: 2019-05-20

Document ID: EDOC1100034225

Views: 44646

Downloads: 100

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next