No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - Basic Configuration

AR500, AR510, AR531, AR550, AR1500, and AR2500 V200R010

This document provides the basic concepts, configuration procedures, and configuration examples in different application scenarios of the Basic configuration supported by the device.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Overview of Auto-Start

Overview of Auto-Start

This section describes the definition and purpose of Auto-Start.

Definition

The Auto-Start function allows a device to automatically load version files after it is powered on and starts.

Purpose

Auto-Config and Auto-Start allow devices to automatically load version files to implement batch site deployment and quick remote deployment of devices to be connected to the network. The two functions reduce labor costs and improve device deployment efficiency.

The differences between the two functions are as follows:
  • Auto-Config is generally used for automatic site deployment on LANs. After being installed and powered on at a site, devices obtain IP addresses and configuration information related to the file server through the DHCP server deployed on the LAN. The devices then automatically obtain version files from a specified file server based on the configuration information and load the files to complete site deployment.
  • Auto-Start is generally used for automatic site deployment across LANs. Devices load site deployment configurations including IP addresses and configuration information related to the file server in advance using customized factory settings or USB flash drives. After being installed and powered on at a site, the devices directly set up connections to the file server, automatically obtain version files from the file server and load the files to complete site deployment.
Translation
Download
Updated: 2019-05-20

Document ID: EDOC1100034225

Views: 44867

Downloads: 100

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next