No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - Basic Configuration

AR500, AR510, AR531, AR550, AR1500, and AR2500 V200R010

This document provides the basic concepts, configuration procedures, and configuration examples in different application scenarios of the Basic configuration supported by the device.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Restarting the Device

Restarting the Device

Pre-configuration Tasks

Before restarting the device, complete the following tasks:
  • Configure system startup files.

Context

Use one of the following methods to restart the device:
  • Restart the device immediately after configuration: The device restarts immediately after the reboot command is run.
  • Restart the device at scheduled time: The device can be restarted at a specified time later. When the configuration is complete, you can configure the device to restart at time when few services are running to minimize the impact of device restart on services.

The device restarts with the specified startup software. If the specified startup software is damaged, the device restarts with the backup startup software. If the restart still fails, the device searches the valid startup software package on the storage devices in the sequence "." If more than one valid startup software package is discovered, the device starts with the first discovered. When the device finds valid system software packages and configuration files on the storage device, it selects a rollback version and restarts with the selected version. If the device does not find valid system software and configuration file, it repeats the preceding operations.

  • Do not restart the device unless necessary because device restart causes service interruption in a short time.

  • Save the current configuration so that it will take effect after the device restarts.

Procedure

  • Restart the device immediately.

    In the user view, run the reboot [ fast ] command to restart the device.

    • The fast parameter indicates quick restart of the device. The system does not ask you whether to save the configuration file in fast startup.

  • Restart the device at scheduled time.

    In the user view, run the schedule reboot { at time | delay interval | every time } command to restart the device at scheduled time.

    • at time specifies the specific time to restart the device.
    • delay interval specifies the waiting time before restarting the device.
    • every time specifies the scheduled restart time of a device.
      NOTE:

      Only the AR502CG-L supports this parameter.

Verifying the Configuration

  • If scheduled restart is configured, run the display schedule reboot command to check the configuration of device restart.
Translation
Download
Updated: 2019-05-20

Document ID: EDOC1100034225

Views: 44964

Downloads: 100

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next