No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


CLI-based Configuration Guide - IP Multicast

AR500, AR510, AR531, AR550, AR1500, and AR2500 V200R010

This document describes the concepts and configuration procedures of IP Service features on the device, and provides the configuration examples.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Summary of IPv4 PIM Configuration Tasks

Summary of IPv4 PIM Configuration Tasks

After PIM is configured, multicast data can be routed and forwarded on an IPv4 network. PIM includes multiple modes that apply to different scenarios. Table 4-2 lists IPv4 PIM configuration tasks.

Table 4-2  IPv4 PIM configuration tasks
Task Description

Configuring IPv4 PIM-DM

PIM-DM uses the ASM model to provide multicast services. The configuration is simple, but multicast data is periodically broadcast. PIM-DM applies to the small network where members are densely distributed.

Configuring IPv4 PIM-SM

PIM-SM uses the ASM and SSM models to provide multicast services. In the ASM model, a multicast distribution tree (MDT) is set up by receivers actively joining the multicast group. PIM-SM needs to maintain an RP, set up an RPT, and register with a multicast source. The ASM model applies to the large network where members are widely distributed. In the SSM model, PIM-SM sets up an SPT between a multicast source and members and does not need to maintain an RP, set up an RPT, or register with the multicast source. The SSM model applies to the network where users know the multicast source location and directly order multicast data from a specified multicast source.

The PIM multi-instance configuration is included in all configuration tasks.

To implement PIM multi-instance, configure PIM in multiple VPN instances. After PIM multi-instance is configured on the industrial switch router, multicast data on private networks can be routed and forwarded in multicast mode in VPN instances. PIM multi-instance configurations in different VPN instances do not affect each other.
Updated: 2019-08-09

Document ID: EDOC1100034230

Views: 137570

Downloads: 41

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next