No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - IP Multicast

AR500, AR510, AR531, AR550, AR1500, and AR2500 V200R010

This document describes the concepts and configuration procedures of IP Service features on the device, and provides the configuration examples.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Clearing Statistics About IPv6 PIM Control Packets

Clearing Statistics About IPv6 PIM Control Packets

Context

To recollect statistics about IPv6 PIM control packets, clear the existing statistics. The statistics cannot be restored after you clear them. This operation does not affect normal running of IPv6 PIM.

Statistics about IPv6 PIM control packets on an interface cannot be restored after you clear them. Exercise caution when clearing the statistics.

Procedure

  • To clear statistics about IPv6 PIM control packets on an interface, run the reset pim ipv6 control-message counters [ interface interface-type interface-number ] command in the user view.
Translation
Download
Updated: 2019-08-09

Document ID: EDOC1100034230

Views: 127668

Downloads: 38

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next