No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


CLI-based Configuration Guide - IP Multicast

AR500, AR510, AR531, AR550, AR1500, and AR2500 V200R010

This document describes the concepts and configuration procedures of IP Service features on the device, and provides the configuration examples.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
(Optional) Configuring a Static Member Port

(Optional) Configuring a Static Member Port


A member port is connected to user hosts. The member ports can be learned by multicast protocol dynamically or configured manually. After Multicast Listener Discovery (MLD) snooping is enabled in a VLAN, all interfaces in the VLAN learn the multicast packets by default. When an interface receives an MLD Report message, the device sets the interface as a dynamic member port. A dynamic member port has the aging time.

If the user hosts connected to an interface need to receive the multicast packets destined for a specific multicast group or multicast source group, add the interface to the multicast group or multicast source group manually. The manually added interface is a static member port. The static member port never ages.


  1. Run system-view

    The system view is displayed.

  2. Run interface interface-type interface-number

    The interface view is displayed.

  3. Run mld-snooping static-group group-ipv6-address [ source source-ipv6-address ] vlan vlan-id

    An interface is manually added to a multicast group.

Updated: 2019-08-09

Document ID: EDOC1100034230

Views: 123577

Downloads: 37

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next