No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - IP Multicast

AR500, AR510, AR531, AR550, AR1500, and AR2500 V200R010

This document describes the concepts and configuration procedures of IP Service features on the device, and provides the configuration examples.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
(Optional) Configuring a Static Router Port

(Optional) Configuring a Static Router Port

Context

A router port is on a Layer 2 device and receives multicast protocol packets from an upstream Layer 3 multicast router or Layer 3 switch. The router port receives multicast packets from the upstream device and forwards them to member ports. After Multicast Listener Discovery (MLD) snooping is enabled in a VLAN, all interfaces in the VLAN learn the multicast packets by default. When an interface receives an MLD Query or PIM hello packet, the Layer 2 device sets the interface as a dynamic router port. A dynamic router port has the aging time.

To receive multicast packets from a certain interface stably in a long period, set the interface as a static router port. A static router port does not age. You can use the undo command to delete it.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run interface interface-type interface-number

    The interface view is displayed.

  3. Run mld-snooping static-router-port vlan vlan-id

    An interface is configured as a static router port.

Translation
Download
Updated: 2019-08-09

Document ID: EDOC1100034230

Views: 127540

Downloads: 38

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next