Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring Parameters for Controlling the MFIB
Context
The multicast forwarding information base (MFIB) of a device controls forwarding of multicast packets. You can control forwarding of multicast packets by configuring the parameters for controlling the MFIB
Pre-configuration Tasks
Before configuring the parameters for controlling the multicast forwarding table, complete the following tasks:
- Configure a unicast routing protocol to ensure normal unicast routing on the network.
- Run the multicast routing-enable command in the system view to enable Layer 3 multicast routing globally.
