No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


CLI-based Configuration Guide - IP Multicast

AR500, AR510, AR531, AR550, AR1500, and AR2500 V200R010

This document describes the concepts and configuration procedures of IP Service features on the device, and provides the configuration examples.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Typical MLD Application

Typical MLD Application

MLD runs between member hosts and directly connected multicast routers to manage and maintain multicast group memberships. To forward multicast data from multicast sources to receivers, multicast routers must run IPv6 Protocol Independent Multicast (PIM) to set up forwarding paths. Figure 3-13 illustrates a typical MLD network topology.

Figure 3-13  Typical MLD network topology

The following solutions can be used in MLD applications.


Member Hosts

Interfaces Connected to Member Hosts

All Routers on the Network

Hosts dynamically join multicast groups through ASM.

Enable MLDv1 or MLDv2.

Enable MLDv1 or MLDv2.

Enable IPv6 PIM-DM or IPv6 PIM-SM.

Hosts dynamically join multicast groups through SSM.

Enable MLDv2.

Enable MLDv2.

Enable IPv6 PIM-SM.

Hosts dynamically join multicast groups through SSM mapping.

Enable MLDv1.

Enable MLDv2, enable MLD SSM mapping, and configure source-group mapping.

Enable IPv6 PIM-SM.

Updated: 2019-08-09

Document ID: EDOC1100034230

Views: 121396

Downloads: 37

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next