Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Verifying the Configuration of Parameters for Controlling the MFIB
Context
After configuring the parameters for controlling the IPv6 MFIB, check the IPv6 MFIB to verify that the multicast network is operating properly.
Procedure
- Run the display multicast ipv6 forwarding-table [ ipv6-source-address [ ipv6-source-mask-length ] | ipv6-group-address [ ipv6-group-mask-length ] | incoming-interface { interface-type interface-number | register } | outgoing-interface { { exclude | include | match } { interface-type interface-number | register | none } } | { statistics | verbose } ] * command to check the IPv6 MFIB.
Previous
