No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - IP Multicast

AR500, AR510, AR531, AR550, AR1500, and AR2500 V200R010

This document describes the concepts and configuration procedures of IP Service features on the device, and provides the configuration examples.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Summary of IPv6 Multicast Route Management Configuration Tasks

Summary of IPv6 Multicast Route Management Configuration Tasks

Table 8-7 lists IPv6 multicast route management configuration tasks.

Table 8-7  IPv6 multicast route management configuration tasks
Task Description

Configuring IPv6 Multicast Load Splitting

Distributes multicast data to multiple equal-cost paths.

Configuring an IPv6 Multicast Boundary

Restricts the scope of multicast forwarding.

Configuring the Parameters for Controlling the IPv6 Multicast Forwarding Table

Allows you to adjust the number of multicast forwarding entries and the number of downstream nodes.

Translation
Download
Updated: 2019-08-09

Document ID: EDOC1100034230

Views: 121377

Downloads: 37

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next