Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Verifying the Membership Fast-Update Configuration
Prerequisites
After the configuration of membership fast-update is complete, you can run the following commands in any view to check the IGMP snooping configuration and forwarding entries.
Procedure
- Run the display igmp-snooping [ vlan [ vlan-id ] ] configuration command to check the IGMP snooping configuration.
- Run the display l2-multicast forwarding-table vlan vlan-id [ [ source-address source-address ] group-address { group-address | router-group } ] command to check the layer-2 multicast forwarding table in a VLAN.
