Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Verifying the IGMP Proxy Configuration
Prerequisites
After completing IGMP proxy configuration, run the following
commands in any view to check information about IGMP proxy interfaces,
IGMP proxy groups, and IGMP proxy routes.
Procedure
- Run the display igmp proxy [ vpn-instance vpn-instance-name | all-instance ] interface command to check information about IGMP proxy interfaces.
- Run the display igmp proxy [ vpn-instance vpn-instance-name | all-instance ] group [ group-address ] [ verbose ] command to check information about IGMP proxy groups.
- Run the display igmp proxy [ vpn-instance vpn-instance-name | all-instance ] routing-table [ group-address [ mask { group-mask-length | group-mask } ] | source-address [ mask { source-mask-length | source-mask }] | outgoing-interface { include | exclude | match } { interface-type interface-number | none } | flags flag-value | fsm ] * [ outgoing-interface-number [ number ] ] command to check the IGMP proxy routing table.
Previous
