No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - IP Multicast

AR500, AR510, AR531, AR550, AR1500, and AR2500 V200R010

This document describes the concepts and configuration procedures of IP Service features on the device, and provides the configuration examples.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Clearing (S, G) Information in the SA Cache

Clearing (S, G) Information in the SA Cache

Context

The (S, G) information in the Source-Active (SA) cache cannot be restored after you clear it. Therefore, exercise caution when you run the command.

Procedure

  • Run the reset msdp [ vpn-instance vpn-instance-name | all-instance ] sa-cache [ group-address ] command in the user view to clear the (S, G) information in the SA cache.
Translation
Download
Updated: 2019-08-09

Document ID: EDOC1100034230

Views: 127856

Downloads: 38

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next