Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Verifying the Configuration of MLD Performance Parameters
Context
After completing the preceding configuration, you can run the following commands in any view to check the adjusted membership information, MLD configuration, and MLD running status.
Procedure
- Run the display mld interface [ interface-type interface-number | up | down ] [ verbose ] command to check the MLD information on an interface.
- Run the display mld group [ ipv6-group-address | interface interface-type interface-number ]* [ verbose ] command to check information about MLD groups that hosts have dynamically joined by sending Multicast Listener Report messages.