No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - IP Multicast

AR500, AR510, AR531, AR550, AR1500, and AR2500 V200R010

This document describes the concepts and configuration procedures of IP Service features on the device, and provides the configuration examples.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring Basic IGMP Proxy Functions

Configuring Basic IGMP Proxy Functions

Context

In a simple tree topology, multicast industrial switch routers directly connected to user network segments do not need to run any complicated multicast routing protocol (such as PIM). However, the upstream access devices have to manage many users because the multicast industrial switch routers transparently transmit all IGMP messages from hosts. In this case, configure the IGMP proxy function on the multicast router so that the router collects IGMP Report and Leave messages from receiver hosts before sending these messages to the upstream access device. In addition, the router maintains membership and forwards multicast messages based on the membership. To the upstream access device, the multicast router configured with IGMP proxy is a host.

IGMP proxy is configured on upstream interfaces of an IGMP proxy device, and IGMP is configured on its downstream interfaces.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run interface interface-type interface-number

    The interface view is displayed.

  3. Run igmp proxy

    IGMP proxy is enabled.

    By default, IGMP proxy is disabled on an interface.

Translation
Download
Updated: 2019-08-09

Document ID: EDOC1100034230

Views: 127895

Downloads: 38

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next