No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


CLI-based Configuration Guide - IP Multicast

AR500, AR510, AR531, AR550, AR1500, and AR2500 V200R010

This document describes the concepts and configuration procedures of IP Service features on the device, and provides the configuration examples.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring Basic IGMP Snooping Functions

Configuring Basic IGMP Snooping Functions

Pre-configuration Tasks

Basic IGMP snooping functions enable a device to create and maintain a Layer 2 multicast forwarding table and implement on-demand multicast data transmission at the data link layer.

Before configuring IGMP snooping functions, create the related VLAN.

Configuration Procedure

Enabling IGMP Snooping and Configuring the IGMP Snooping Version are mandatory and other tasks are optional.

Updated: 2019-08-09

Document ID: EDOC1100034230

Views: 122793

Downloads: 37

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next