No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


CLI-based Configuration Guide - IP Multicast

AR500, AR510, AR531, AR550, AR1500, and AR2500 V200R010

This document describes the concepts and configuration procedures of IP Service features on the device, and provides the configuration examples.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Clearing IGMP Snooping Statistics

Clearing IGMP Snooping Statistics


IGMP snooping statistics include the number of IGMP Report, Leave, and Query messages received in a VLAN. To collect IGMP snooping statistics in a period of time, run the reset command to set the IGMP snooping statistics to 0.

IGMP snooping statistics cannot be restored after being cleared. Exercise caution when you use the command.


  • Run the reset igmp-snooping statistics { all | vlan { vlan-id | all } } command in the user view to clear IGMP snooping statistics.
Updated: 2019-08-09

Document ID: EDOC1100034230

Views: 122863

Downloads: 37

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next