No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - IP Service

AR500, AR510, AR531, AR550, AR1500, and AR2500 V200R010

This document describes the concepts and configuration procedures of IP Service features on the device, and provides the configuration examples.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring Source IP Addresses Verification

Configuring Source IP Addresses Verification

Context

Configuring source IP address verification enables an interface to check validity of source IP addresses of received packets. Packets with invalid addresses are discarded. The interface only check validity of source IP addresses of the packets that are forwarded to the CPU and does not check validity of source IP addresses of the packets that will be directly forwarded according to the FIB table.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run interface interface-type interface-number

  3. Run ip verify source-address

    Source IP address verification is configured.

    By default, an interface does not check validity of source IP addresses of received packets.

Translation
Download
Updated: 2019-05-20

Document ID: EDOC1100034231

Views: 79008

Downloads: 51

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next