No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


CLI-based Configuration Guide - IP Service

AR500, AR510, AR531, AR550, AR1500, and AR2500 V200R010

This document describes the concepts and configuration procedures of IP Service features on the device, and provides the configuration examples.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Verifying the TCP6 Configuration

Verifying the TCP6 Configuration


  • Run the display tcp ipv6 status [ [ task-id task-id ] [ socket-id socket-id ] | [ local-ip ipv6-address ] [ local-port local-port-number ] [ remote-ip ipv6-address ] [ remote-port remote-port-number ] ] command to check the status of all IPv6 TCP connections.
  • Run the display tcp ipv6 statistics command to check TCP6 traffic statistics.
  • Run the display ipv6 [ ha ] socket [ socketype socket-type | task-id task-id socket-id socket-id ] command to check information about a specified socket.
Updated: 2019-05-20

Document ID: EDOC1100034231

Views: 88441

Downloads: 57

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next