Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
(Optional) Configuring the Options of an IPv6 Address Pool
Context
DHCPv6 provides various options. To use these options, add
them to the attribute list of the DHCPv6 server manually. If the DHCPv6
server is configured with the vendor-defined Option field, the client
can obtain the configuration information in the Option field of the
DHCPv6 reply packet from the server when a DHCPv6 client applies for
an IPv6 address.
Procedure
- Run system-view
The system view is displayed.
- Run dhcpv6 pool pool-name
An IPv6 address pool is created and the address pool view is displayed.
By default, no IPv6 address pool is created on the device.
- Run vendor-specific vendor-id
Vendor-defined options are configured for the IPv6 address pool and the vendor-defined mode view is displayed.
By default, no vendor-defined option is configured. A maximum of 8 vendor-defined options can be configured for one IPv6 address pool.
vendor-id indicates the vendor identifier ID, which is assigned by the IANA. The identifier ID of Huawei is 2011.
- Run suboption suboption-code { address ipv6-address &<1-4> | ascii ascii-string | hex hex-string }
Vendor-defined DHCPv6 sub-options are configured in the vendor-defined mode view.
A maximum of 16 vendor-defined sub-options can be configured in the vendor-defined mode view.
Previous
