No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - IP Service

AR500, AR510, AR531, AR550, AR1500, and AR2500 V200R010

This document describes the concepts and configuration procedures of IP Service features on the device, and provides the configuration examples.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring a DHCPv6 PD Server

Configuring a DHCPv6 PD Server

Pre-configuration Tasks

You can configure a DHCPv6 PD server to dynamically assign configuration information such as IPv6 addresses to DHCPv6 PD clients.

Before configuring the DHCPv6 PD server, complete the following tasks:

  • Ensure that the link between the DHCPv6 client and the industrial switch router works properly and the DHCPv6 client can communicate with the industrial switch router.

  • (Optional) In the scenario where the DHCPv6 relay exists, configure the route between the industrial switch router and DHCPv6 relay agent or client.

Configuration Logic

The configuration tasks are performed in sequence.

Translation
Download
Updated: 2019-05-20

Document ID: EDOC1100034231

Views: 78931

Downloads: 51

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next