No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


CLI-based Configuration Guide - IP Service

AR500, AR510, AR531, AR550, AR1500, and AR2500 V200R010

This document describes the concepts and configuration procedures of IP Service features on the device, and provides the configuration examples.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Verifying the DHCPv6 PD Server Configuration

Verifying the DHCPv6 PD Server Configuration


  • Run the display dhcpv6 duid command to check the DUID of the DHCPv6 device on the network.
  • Run the display dhcpv6 pool pool-name [ allocated { address | prefix } | binding [ duid ] | conflict address | ipv6-address | ipv6-prefix/prefix-length ] command to check IPv6 address pool configurations.
  • Run the display dhcpv6 server [ database | [ statistics ] [ interface interface-type interface-number ] ] command to check information about the DHCPv6 server function.
Updated: 2019-05-20

Document ID: EDOC1100034231

Views: 78683

Downloads: 51

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next