No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - IP Service

AR500, AR510, AR531, AR550, AR1500, and AR2500 V200R010

This document describes the concepts and configuration procedures of IP Service features on the device, and provides the configuration examples.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Clearing NAT Mapping Entries

Clearing NAT Mapping Entries

Context

NOTE:

The cleared entries cannot be restored; therefore, confirm the action before you use the command.

Procedure

  • After you are determined to clear NAT mapping entries, run the reset nat session { all | transit interface interface-type interface-number [ .subnumber ] } command in the system view.
Translation
Download
Updated: 2019-05-20

Document ID: EDOC1100034231

Views: 78428

Downloads: 51

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next