No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - IP Service

AR500, AR510, AR531, AR550, AR1500, and AR2500 V200R010

This document describes the concepts and configuration procedures of IP Service features on the device, and provides the configuration examples.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ARP Overview

ARP Overview

This section describes the definition, background, and functions of ARP.

Definition

The Address Resolution Protocol (ARP) maps IP addresses into MAC addresses.

Purpose

On a local area network (LAN), a host or a network device must learn the IP address of the destination host or device before sending data to it. Additionally, the host or network device must learn the physical address of the destination host or device because IP packets must be encapsulated into frames for transmission over a physical network. Therefore, the mapping from an IP address into a physical address is required. ARP is used to map IP addresses into physical addresses.

Translation
Download
Updated: 2019-05-20

Document ID: EDOC1100034231

Views: 80346

Downloads: 51

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next