Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Monitoring DHCPv6 Operation
Procedure
- Run the display dhcpv6 statistics command to check statistics on DHCPv6 packets.
- Run the display dhcpv6 server [ database | [ statistics ] [ interface interface-type interface-number ] ] command to check information about the DHCPv6 server function.
- Run the display dhcpv6 relay [ interface interface-type interface-number ] command to check the configuration of the interface where the DHCPv6 relay function is configured.
- Run the display dhcpv6 relay statistics [ interface interface-type interface-number ] command to check DHCPv6 packet statistics on the DHCPv6 relay.
- Run the display dhcpv6 client statistics [ interface interface-type interface-number ] command to check packet statistics on the DHCPv6 client.
- Run the display dhcpv6 client prefix [ name prefix-name ] command to check the IPv6 address prefix obtained by the DHCPv6 client.
