No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - IP Service

AR500, AR510, AR531, AR550, AR1500, and AR2500 V200R010

This document describes the concepts and configuration procedures of IP Service features on the device, and provides the configuration examples.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring an IP address Unnumbered Interface

Configuring an IP address Unnumbered Interface

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run interface interface-type interface-number

    The interface view is displayed.

    • IP unnumbered can be configured on PPP, HDLC, and Tunnel interfaces.

    • Ethernet interfaces can borrow IP addresses from Loopback interfaces.

  3. Run ip address unnumbered interface interface-type interface-number

    The interface is configured to borrow the IP address from a specified interface.

Translation
Download
Updated: 2019-05-20

Document ID: EDOC1100034231

Views: 78612

Downloads: 51

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next