No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


CLI-based Configuration Guide - IP Service

AR500, AR510, AR531, AR550, AR1500, and AR2500 V200R010

This document describes the concepts and configuration procedures of IP Service features on the device, and provides the configuration examples.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
IP Address Conflicts

IP Address Conflicts

Possible Cause The DHCP server does not exclude manually configured IP addresses from the address pool.
Verification Disable the network adapter of the client or disconnect the network cable. Then, from another connected host, ping the conflicting IP address. If you can ping the IP address, it is manually configured.
  • Exclude the conflicting IP address from the address pool.
    • For an interface address pool, run:
      dhcp server excluded-ip-address
    • For a global address pool, run:

    Then, on the client, release the IP address and apply for a new one.

  • Change the host's manually configured IP address.

IP address conflict detection can be configured on the DHCP server to prevent conflicts. For details, see (Optional) Configuring IP Address Conflict Detection.

Updated: 2019-05-20

Document ID: EDOC1100034231

Views: 88436

Downloads: 57

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next