No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - IP Service

AR500, AR510, AR531, AR550, AR1500, and AR2500 V200R010

This document describes the concepts and configuration procedures of IP Service features on the device, and provides the configuration examples.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring IPv6 DNS Proxy or Relay

Configuring IPv6 DNS Proxy or Relay

When the DNS client and DNS server are on different LANs, the device enabled with IPv6 DNS proxy or Relay can forward DNS request and reply packets.

Pre-configuration Tasks

Before configuring IPv6 DNS proxy or Relay, complete the following tasks:
  • Connecting interfaces and setting physical parameters for the interfaces to ensure that the physical status of the interfaces is Up
  • Configuring link layer protocol parameters for interfaces to ensure that the link layer protocol status on the interfaces is Up
  • Configuring a DNS server
  • Configuring routes between the local routing device and the DNS server and between the local routing device and the IPv6 DNS client
Translation
Download
Updated: 2019-05-20

Document ID: EDOC1100034231

Views: 78679

Downloads: 51

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next